Custom Belt — PU Leather with Moisture-Wicking Finish
We supply belt to brands, retailers and uniform programmes, made in PU Leather with moisture-wicking finish for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 35 mm |
| Type | sash belt |
| Material | PU Leather |
| Construction / finish | Moisture-Wicking Finish |
| Colour options | 16 shades, Pantone matched |
| Packing | carded |
| MOQ | 2000 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Hot Foil Stamping — available on PU Leather, quoted per position and per colour.
- Epoxy Dome — available on PU Leather, quoted per position and per colour.
- Sanforising — available on PU Leather, quoted per position and per colour.
- Rubber Coating — available on PU Leather, quoted per position and per colour.
- Embossing — available on PU Leather, quoted per position and per colour.
- Ultrasonic Welding — available on PU Leather, quoted per position and per colour.
- Machine-Rolled Hem — available on PU Leather, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed PU Leather
- Construction sample with moisture-wicking finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
