Custom Belt — Mesh with Screen Printing
We supply belt to brands, retailers and uniform programmes, made in Mesh with screen printing for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: shade variation within one carton, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 25 mm |
| Type | uniform duty belt |
| Material | Mesh |
| Construction / finish | Screen Printing |
| Colour options | 24 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 3000 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Mercerising — available on Mesh, quoted per position and per colour.
- Gold Plating — available on Mesh, quoted per position and per colour.
- Hard Enamel Fill — available on Mesh, quoted per position and per colour.
- Heat Transfer Printing — available on Mesh, quoted per position and per colour.
- Embossed Grain — available on Mesh, quoted per position and per colour.
- Embossing — available on Mesh, quoted per position and per colour.
- Nickel Plating — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with screen printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
