Custom Earmuffs & Eye Mask in Recycled Polyester (rPET) with Piece Dyeing for Bridal and Eveningwear Studios

Custom Earmuffs & Eye Mask — Recycled Polyester (rPET) with Piece Dyeing

We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with piece dyeing for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is light blocking at the nose bridge, which is where masks leak — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Water-Repellent Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Stamping — available on Recycled Polyester (rPET), quoted per position and per colour.
• Sanforising — available on Recycled Polyester (rPET), quoted per position and per colour.
• Soft Enamel Fill — available on Recycled Polyester (rPET), quoted per position and per colour.
• Braided Weave — available on Recycled Polyester (rPET), quoted per position and per colour.
• Tassel Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Die-Casting — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with piece dyeing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same light blocking at the nose bridge.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Start your earmuffs & eye mask programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.