Custom Belt — Horn with Powder Coating
We supply belt to brands, retailers and uniform programmes, made in Horn with powder coating for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 25 mm |
| Type | braided belt |
| Material | Horn |
| Construction / finish | Powder Coating |
| Colour options | 16 shades, Pantone matched |
| Packing | carded |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; REACH nickel-release test for metal findings |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Hard Enamel Fill — available on Horn, quoted per position and per colour.
- Edge Painting — available on Horn, quoted per position and per colour.
- Gold Plating — available on Horn, quoted per position and per colour.
- Anti-Pilling Finish — available on Horn, quoted per position and per colour.
- Stamping — available on Horn, quoted per position and per colour.
- Flatlock Seam — available on Horn, quoted per position and per colour.
- Enzyme Wash — available on Horn, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Horn
- Construction sample with powder coating applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
