Custom Belt — Felt with Machine-Rolled Hem
We supply belt to brands, retailers and uniform programmes, made in Felt with machine-rolled hem for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 30 mm |
| Type | braided belt |
| Material | Felt |
| Construction / finish | Machine-Rolled Hem |
| Colour options | 6 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 300 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | REACH and GPSR documentation; salt spray test for metal finishes |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Brushed Finish — available on Felt, quoted per position and per colour.
- Machine-Rolled Hem — available on Felt, quoted per position and per colour.
- Black Oxide — available on Felt, quoted per position and per colour.
- Sewn Edge — available on Felt, quoted per position and per colour.
- Placement Printing — available on Felt, quoted per position and per colour.
- Die-Casting — available on Felt, quoted per position and per colour.
- Powder Coating — available on Felt, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Felt
- Construction sample with machine-rolled hem applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
