Custom Belt — Mesh with Hot Foil Stamping
We supply belt to brands, retailers and uniform programmes, made in Mesh with hot foil stamping for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 30 mm |
| Type | braided belt |
| Material | Mesh |
| Construction / finish | Hot Foil Stamping |
| Colour options | 16 shades, Pantone matched |
| Packing | gift box |
| MOQ | 300 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; azo dye-free declaration |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Rose Gold Plating — available on Mesh, quoted per position and per colour.
- Edge Painting — available on Mesh, quoted per position and per colour.
- Flatlock Seam — available on Mesh, quoted per position and per colour.
- Binding Tape Edge — available on Mesh, quoted per position and per colour.
- Hard Enamel Fill — available on Mesh, quoted per position and per colour.
- Powder Coating — available on Mesh, quoted per position and per colour.
- UV Printing — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with hot foil stamping applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
