Custom Belt in ABS Plastic with Anti-UV Finish for Uniform and Corporate Programmes

Custom Belt — ABS Plastic with Anti-UV Finish

We supply belt to brands, retailers and uniform programmes, made in ABS Plastic with anti-uv finish for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Gunmetal Plating — available on ABS Plastic, quoted per position and per colour.
• Rotary Screen Printing — available on ABS Plastic, quoted per position and per colour.
• Brushed Finish — available on ABS Plastic, quoted per position and per colour.
• Edge Painting — available on ABS Plastic, quoted per position and per colour.
• Injection Moulding — available on ABS Plastic, quoted per position and per colour.
• Rose Gold Plating — available on ABS Plastic, quoted per position and per colour.
• Antique Silver — available on ABS Plastic, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed ABS Plastic
3. Construction sample with anti-uv finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your belt programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.