Custom Belt — Neoprene with Soft Enamel Fill
We supply belt to brands, retailers and uniform programmes, made in Neoprene with soft enamel fill for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is edge finish and coating flex, which cracks first on a folded belt — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 20 mm |
| Type | webbing belt |
| Material | Neoprene |
| Construction / finish | Soft Enamel Fill |
| Colour options | 16 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; EN 71 part 3 for decorative components |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Enzyme Wash — available on Neoprene, quoted per position and per colour.
- Paint Spray — available on Neoprene, quoted per position and per colour.
- Sewn Edge — available on Neoprene, quoted per position and per colour.
- Hot Foil Stamping — available on Neoprene, quoted per position and per colour.
- Placement Printing — available on Neoprene, quoted per position and per colour.
- Injection Moulding — available on Neoprene, quoted per position and per colour.
- Screen Printing — available on Neoprene, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Neoprene
- Construction sample with soft enamel fill applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same edge finish and coating flex.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
