Custom Belt — Tweed with Rotary Screen Printing
We supply belt to brands, retailers and uniform programmes, made in Tweed with rotary screen printing for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is hole or ratchet engagement, because a belt that slips is returned — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 50 mm |
| Type | elastic belt |
| Material | Tweed |
| Construction / finish | Rotary Screen Printing |
| Colour options | 12 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; EN 71 part 3 for decorative components |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Antique Silver — available on Tweed, quoted per position and per colour.
- Anti-Pilling Finish — available on Tweed, quoted per position and per colour.
- Offset Printing — available on Tweed, quoted per position and per colour.
- Mercerising — available on Tweed, quoted per position and per colour.
- Heat Transfer Printing — available on Tweed, quoted per position and per colour.
- Gunmetal Plating — available on Tweed, quoted per position and per colour.
- Overlocked Edge — available on Tweed, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Tweed
- Construction sample with rotary screen printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same hole or ratchet engagement.
FAQ
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
