Custom Belt — Neoprene with Sewn Edge
We supply belt to brands, retailers and uniform programmes, made in Neoprene with sewn edge for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is hole or ratchet engagement, because a belt that slips is returned — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 20 mm |
| Type | braided belt |
| Material | Neoprene |
| Construction / finish | Sewn Edge |
| Colour options | 6 shades, Pantone matched |
| Packing | gift box |
| MOQ | 1000 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Water-Repellent Finish — available on Neoprene, quoted per position and per colour.
- Black Oxide — available on Neoprene, quoted per position and per colour.
- Antique Brass Plating — available on Neoprene, quoted per position and per colour.
- Fringed Edge — available on Neoprene, quoted per position and per colour.
- Paint Spray — available on Neoprene, quoted per position and per colour.
- Ultrasonic Welding — available on Neoprene, quoted per position and per colour.
- Placement Printing — available on Neoprene, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Neoprene
- Construction sample with sewn edge applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same hole or ratchet engagement.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
