Custom Sleeve & Knee Sleeve in Top-Grain Leather with Machine-Rolled Hem for Outerwear and Jacket Programmes

Custom Sleeve & Knee Sleeve — Top-Grain Leather with Machine-Rolled Hem

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Top-Grain Leather with machine-rolled hem for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is gripper band that holds without cutting circulation — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Quilting — available on Top-Grain Leather, quoted per position and per colour.
• Moisture-Wicking Finish — available on Top-Grain Leather, quoted per position and per colour.
• Heat-Cut Edge — available on Top-Grain Leather, quoted per position and per colour.
• Sewn Edge — available on Top-Grain Leather, quoted per position and per colour.
• Rib Knit — available on Top-Grain Leather, quoted per position and per colour.
• Pantone Colour Matching — available on Top-Grain Leather, quoted per position and per colour.
• Anti-Pilling Finish — available on Top-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Top-Grain Leather
3. Construction sample with machine-rolled hem applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same gripper band that holds without cutting circulation.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.