Custom Clothing Accessory in Bonded Leather with Hot Foil Stamping for Outerwear and Jacket Programmes

Custom Clothing Accessory — Bonded Leather with Hot Foil Stamping

We supply clothing accessory to brands, retailers and uniform programmes, made in Bonded Leather with hot foil stamping for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Black Oxide — available on Bonded Leather, quoted per position and per colour.
• Anti-Rust Treatment — available on Bonded Leather, quoted per position and per colour.
• Overlocked Edge — available on Bonded Leather, quoted per position and per colour.
• Binding Tape Edge — available on Bonded Leather, quoted per position and per colour.
• Nickel Plating — available on Bonded Leather, quoted per position and per colour.
• Antique Silver — available on Bonded Leather, quoted per position and per colour.
• Rotary Screen Printing — available on Bonded Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Bonded Leather
3. Construction sample with hot foil stamping applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your clothing accessory programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.