Custom Sleeve & Knee Sleeve — Silicone with Hard Enamel Fill
We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Silicone with hard enamel fill for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is gripper band that holds without cutting circulation — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Sleeve & Knee Sleeve |
|---|---|
| Size | M |
| Type | sun protection sleeve |
| Material | Silicone |
| Construction / finish | Hard Enamel Fill |
| Colour options | 8 shades, Pantone matched |
| Packing | gift box |
| MOQ | 1000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; EN 71 part 3 for decorative components |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Piece Dyeing — available on Silicone, quoted per position and per colour.
- Heat-Cut Edge — available on Silicone, quoted per position and per colour.
- Ultrasonic Welding — available on Silicone, quoted per position and per colour.
- Quilting — available on Silicone, quoted per position and per colour.
- Mercerised Finish — available on Silicone, quoted per position and per colour.
- Tie Dyeing — available on Silicone, quoted per position and per colour.
- Pantone Colour Matching — available on Silicone, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Silicone
- Construction sample with hard enamel fill applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same gripper band that holds without cutting circulation.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
Start your sleeve & knee sleeve programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
