Custom Clothing Accessory in Full-Grain Leather with Tassel Finish for E-commerce and Small-Batch Brands

Custom Clothing Accessory — Full-Grain Leather with Tassel Finish

We supply clothing accessory to brands, retailers and uniform programmes, made in Full-Grain Leather with tassel finish for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Applique — available on Full-Grain Leather, quoted per position and per colour.
• Offset Printing — available on Full-Grain Leather, quoted per position and per colour.
• Laser Cutting — available on Full-Grain Leather, quoted per position and per colour.
• Embossed Grain — available on Full-Grain Leather, quoted per position and per colour.
• Ultrasonic Welding — available on Full-Grain Leather, quoted per position and per colour.
• Mercerising — available on Full-Grain Leather, quoted per position and per colour.
• Sequin Stitching — available on Full-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Full-Grain Leather
3. Construction sample with tassel finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

How long does sampling take?

A first sample takes 14 working days, and each revision about 3 days.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.