Custom Gloves — Suede with Powder Coating
We supply gloves to brands, retailers and uniform programmes, made in Suede with powder coating for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is size grading across a full run, because hands vary more than chests — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Gloves |
|---|---|
| Size | XXL / 11 |
| Type | work glove |
| Material | Suede |
| Construction / finish | Powder Coating |
| Colour options | 16 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 300 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; EN 71 part 3 for decorative components |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Anti-UV Finish — available on Suede, quoted per position and per colour.
- Heat Transfer Printing — available on Suede, quoted per position and per colour.
- Edge Painting — available on Suede, quoted per position and per colour.
- Cable Knit — available on Suede, quoted per position and per colour.
- Piece Dyeing — available on Suede, quoted per position and per colour.
- Machine-Rolled Hem — available on Suede, quoted per position and per colour.
- Screen Printing — available on Suede, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Suede
- Construction sample with powder coating applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same size grading across a full run.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your gloves programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
