Custom Clothing Accessory — Microfibre with Anti-Pilling Finish
We supply clothing accessory to brands, retailers and uniform programmes, made in Microfibre with anti-pilling finish for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 25 mm |
| Type | garment chain |
| Material | Microfibre |
| Construction / finish | Anti-Pilling Finish |
| Colour options | 12 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 2000 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | UKCA and REACH documentation; salt spray test for metal finishes |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Tassel Finish — available on Microfibre, quoted per position and per colour.
- Binding Tape Edge — available on Microfibre, quoted per position and per colour.
- Anti-UV Finish — available on Microfibre, quoted per position and per colour.
- Hard Enamel Fill — available on Microfibre, quoted per position and per colour.
- Powder Coating — available on Microfibre, quoted per position and per colour.
- Heat Transfer Printing — available on Microfibre, quoted per position and per colour.
- Edge Painting — available on Microfibre, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Microfibre
- Construction sample with anti-pilling finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Start your clothing accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
