Custom Sleeve & Knee Sleeve in Interlock Jersey with Knitted Structure for E-commerce and Small-Batch Brands

Custom Sleeve & Knee Sleeve — Interlock Jersey with Knitted Structure

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Interlock Jersey with knitted structure for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is recovery after repeated stretching, because a bagged sleeve is dead — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-Static Finish — available on Interlock Jersey, quoted per position and per colour.
• Mercerising — available on Interlock Jersey, quoted per position and per colour.
• Knitted Structure — available on Interlock Jersey, quoted per position and per colour.
• Piece Dyeing — available on Interlock Jersey, quoted per position and per colour.
• Ultrasonic Welding — available on Interlock Jersey, quoted per position and per colour.
• Edge Painting — available on Interlock Jersey, quoted per position and per colour.
• Rubber Coating — available on Interlock Jersey, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Interlock Jersey
3. Construction sample with knitted structure applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after repeated stretching.

FAQ

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.