Custom Gloves in Full-Grain Leather with Paint Spray for Childrenswear and Schoolwear

Custom Gloves — Full-Grain Leather with Paint Spray

We supply gloves to brands, retailers and uniform programmes, made in Full-Grain Leather with paint spray for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is warmth versus breathability for the climate it is sold in — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Laser Engraving — available on Full-Grain Leather, quoted per position and per colour.
• Dye-Sublimation Printing — available on Full-Grain Leather, quoted per position and per colour.
• Warp Knitting — available on Full-Grain Leather, quoted per position and per colour.
• Braided Weave — available on Full-Grain Leather, quoted per position and per colour.
• Overlocked Edge — available on Full-Grain Leather, quoted per position and per colour.
• Powder Coating — available on Full-Grain Leather, quoted per position and per colour.
• Placement Printing — available on Full-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Full-Grain Leather
3. Construction sample with paint spray applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same warmth versus breathability for the climate it is sold in.

FAQ

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Start your gloves programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.