Custom Sleeve & Knee Sleeve in Interlock Jersey with Hard Enamel Fill for Uniform and Corporate Programmes

Custom Sleeve & Knee Sleeve — Interlock Jersey with Hard Enamel Fill

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Interlock Jersey with hard enamel fill for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is recovery after repeated stretching, because a bagged sleeve is dead — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Pleating — available on Interlock Jersey, quoted per position and per colour.
• Sanforising — available on Interlock Jersey, quoted per position and per colour.
• Anti-Static Finish — available on Interlock Jersey, quoted per position and per colour.
• Space Dyeing — available on Interlock Jersey, quoted per position and per colour.
• Braided Weave — available on Interlock Jersey, quoted per position and per colour.
• Binding Tape Edge — available on Interlock Jersey, quoted per position and per colour.
• Anti-UV Finish — available on Interlock Jersey, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Interlock Jersey
3. Construction sample with hard enamel fill applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after repeated stretching.

FAQ

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.