Custom Sleeve & Knee Sleeve in Recycled Polyester (rPET) with Epoxy Dome for Uniform and Corporate Programmes

Custom Sleeve & Knee Sleeve — Recycled Polyester (rPET) with Epoxy Dome

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with epoxy dome for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is compression profile, which has to be even along the limb — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• UV Printing — available on Recycled Polyester (rPET), quoted per position and per colour.
• Hard Enamel Fill — available on Recycled Polyester (rPET), quoted per position and per colour.
• Rib Knit — available on Recycled Polyester (rPET), quoted per position and per colour.
• Anti-UV Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Sequin Stitching — available on Recycled Polyester (rPET), quoted per position and per colour.
• Anti-Static Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Anti-Pilling Finish — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with epoxy dome applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same compression profile.

FAQ

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.