Custom Sleeve & Knee Sleeve in Polypropylene (PP) with Beaded Detail for Bridal and Eveningwear Studios

Custom Sleeve & Knee Sleeve — Polypropylene (PP) with Beaded Detail

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Polypropylene (PP) with beaded detail for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is gripper band that holds without cutting circulation — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: inconsistent sizing between production runs, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Warp Knitting — available on Polypropylene (PP), quoted per position and per colour.
• Water-Repellent Finish — available on Polypropylene (PP), quoted per position and per colour.
• UV Printing — available on Polypropylene (PP), quoted per position and per colour.
• Yarn Dyeing — available on Polypropylene (PP), quoted per position and per colour.
• Rhinestone Setting — available on Polypropylene (PP), quoted per position and per colour.
• Applique — available on Polypropylene (PP), quoted per position and per colour.
• Enzyme Wash — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polypropylene (PP)
3. Construction sample with beaded detail applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same gripper band that holds without cutting circulation.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your sleeve & knee sleeve programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.