Custom Gloves in Top-Grain Leather with Binding Tape Edge for Bridal and Eveningwear Studios

Custom Gloves — Top-Grain Leather with Binding Tape Edge

We supply gloves to brands, retailers and uniform programmes, made in Top-Grain Leather with binding tape edge for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is warmth versus breathability for the climate it is sold in — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: inconsistent sizing between production runs, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• UV Printing — available on Top-Grain Leather, quoted per position and per colour.
• Ultrasonic Welding — available on Top-Grain Leather, quoted per position and per colour.
• Stamping — available on Top-Grain Leather, quoted per position and per colour.
• Yarn Dyeing — available on Top-Grain Leather, quoted per position and per colour.
• Piece Dyeing — available on Top-Grain Leather, quoted per position and per colour.
• Binding Tape Edge — available on Top-Grain Leather, quoted per position and per colour.
• Embossing — available on Top-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Top-Grain Leather
3. Construction sample with binding tape edge applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same warmth versus breathability for the climate it is sold in.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your gloves programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.