Custom Gloves in Polycarbonate with Moisture-Wicking Finish for Uniform and Corporate Programmes

Custom Gloves — Polycarbonate with Moisture-Wicking Finish

We supply gloves to brands, retailers and uniform programmes, made in Polycarbonate with moisture-wicking finish for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Dye-Sublimation Printing — available on Polycarbonate, quoted per position and per colour.
• Warp Knitting — available on Polycarbonate, quoted per position and per colour.
• Anti-Pilling Finish — available on Polycarbonate, quoted per position and per colour.
• Heat Transfer Printing — available on Polycarbonate, quoted per position and per colour.
• Soft Enamel Fill — available on Polycarbonate, quoted per position and per colour.
• Mercerising — available on Polycarbonate, quoted per position and per colour.
• Laser Cutting — available on Polycarbonate, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polycarbonate
3. Construction sample with moisture-wicking finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your gloves programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.