Custom Sleeve & Knee Sleeve in Wool Melton with Anti-UV Finish for Denim and Workwear Programmes

Custom Sleeve & Knee Sleeve — Wool Melton with Anti-UV Finish

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Wool Melton with anti-uv finish for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is recovery after repeated stretching, because a bagged sleeve is dead — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: inconsistent sizing between production runs, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Sanforising — available on Wool Melton, quoted per position and per colour.
• Injection Moulding — available on Wool Melton, quoted per position and per colour.
• Tassel Finish — available on Wool Melton, quoted per position and per colour.
• Fringed Edge — available on Wool Melton, quoted per position and per colour.
• Sequin Stitching — available on Wool Melton, quoted per position and per colour.
• Quilting — available on Wool Melton, quoted per position and per colour.
• Braided Weave — available on Wool Melton, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Wool Melton
3. Construction sample with anti-uv finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after repeated stretching.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Start your sleeve & knee sleeve programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.