Custom Gloves in Full-Grain Leather with Hot Foil Stamping for E-commerce and Small-Batch Brands

Custom Gloves — Full-Grain Leather with Hot Foil Stamping

We supply gloves to brands, retailers and uniform programmes, made in Full-Grain Leather with hot foil stamping for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Powder Coating — available on Full-Grain Leather, quoted per position and per colour.
• Water-Repellent Finish — available on Full-Grain Leather, quoted per position and per colour.
• Moisture-Wicking Finish — available on Full-Grain Leather, quoted per position and per colour.
• Yarn Dyeing — available on Full-Grain Leather, quoted per position and per colour.
• Jacquard Weave — available on Full-Grain Leather, quoted per position and per colour.
• Flatlock Seam — available on Full-Grain Leather, quoted per position and per colour.
• Epoxy Dome — available on Full-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Full-Grain Leather
3. Construction sample with hot foil stamping applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.

FAQ

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your gloves programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.