Custom Clothing Accessory in Recycled Polyester (rPET) with Hot Foil Stamping for Childrenswear and Schoolwear

Custom Clothing Accessory — Recycled Polyester (rPET) with Hot Foil Stamping

We supply clothing accessory to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with hot foil stamping for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is plating that survives contact with skin and dry cleaning — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Pleating — available on Recycled Polyester (rPET), quoted per position and per colour.
• Embossed Grain — available on Recycled Polyester (rPET), quoted per position and per colour.
• Soft Enamel Fill — available on Recycled Polyester (rPET), quoted per position and per colour.
• Beaded Detail — available on Recycled Polyester (rPET), quoted per position and per colour.
• Rose Gold Plating — available on Recycled Polyester (rPET), quoted per position and per colour.
• Fringe Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Laser Cutting — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with hot foil stamping applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same plating that survives contact with skin and dry cleaning.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.