Custom Sleeve & Knee Sleeve in Linen Union with Anti-Pilling Finish for Childrenswear and Schoolwear

Custom Sleeve & Knee Sleeve — Linen Union with Anti-Pilling Finish

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Linen Union with anti-pilling finish for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is recovery after repeated stretching, because a bagged sleeve is dead — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Warp Knitting — available on Linen Union, quoted per position and per colour.
• Jacquard Weave — available on Linen Union, quoted per position and per colour.
• Paint Spray — available on Linen Union, quoted per position and per colour.
• Stamping — available on Linen Union, quoted per position and per colour.
• Heat-Cut Edge — available on Linen Union, quoted per position and per colour.
• Rhinestone Setting — available on Linen Union, quoted per position and per colour.
• UV Printing — available on Linen Union, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Linen Union
3. Construction sample with anti-pilling finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after repeated stretching.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.