Custom Sleeve & Knee Sleeve — Mesh with Injection Moulding
We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Mesh with injection moulding for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is gripper band that holds without cutting circulation — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Sleeve & Knee Sleeve |
|---|---|
| Size | M |
| Type | graduated compression sleeve |
| Material | Mesh |
| Construction / finish | Injection Moulding |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 1000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; azo dye-free declaration |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Water-Repellent Finish — available on Mesh, quoted per position and per colour.
- Edge Painting — available on Mesh, quoted per position and per colour.
- Quilting — available on Mesh, quoted per position and per colour.
- Heat-Cut Edge — available on Mesh, quoted per position and per colour.
- Anti-Pilling Finish — available on Mesh, quoted per position and per colour.
- Space Dyeing — available on Mesh, quoted per position and per colour.
- Knitted Structure — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with injection moulding applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same gripper band that holds without cutting circulation.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your sleeve & knee sleeve programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
