Custom Clothing Accessory — Tencel Lyocell with Binding Tape Edge
We supply clothing accessory to brands, retailers and uniform programmes, made in Tencel Lyocell with binding tape edge for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 80 mm |
| Type | lapel brooch |
| Material | Tencel Lyocell |
| Construction / finish | Binding Tape Edge |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 3000 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | GSO conformity with Arabic labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Rose Gold Plating — available on Tencel Lyocell, quoted per position and per colour.
- Anti-Static Finish — available on Tencel Lyocell, quoted per position and per colour.
- Offset Printing — available on Tencel Lyocell, quoted per position and per colour.
- Embossed Grain — available on Tencel Lyocell, quoted per position and per colour.
- Placement Printing — available on Tencel Lyocell, quoted per position and per colour.
- Tassel Finish — available on Tencel Lyocell, quoted per position and per colour.
- Dye-Sublimation Printing — available on Tencel Lyocell, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Tencel Lyocell
- Construction sample with binding tape edge applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
Start your clothing accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
