Custom Sleeve & Knee Sleeve in Recycled Polyester (rPET) with Hard Enamel Fill for Denim and Workwear Programmes

Custom Sleeve & Knee Sleeve — Recycled Polyester (rPET) with Hard Enamel Fill

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with hard enamel fill for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is compression profile, which has to be even along the limb — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Water-Repellent Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Epoxy Dome — available on Recycled Polyester (rPET), quoted per position and per colour.
• Moisture-Wicking Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Warp Knitting — available on Recycled Polyester (rPET), quoted per position and per colour.
• Fringed Edge — available on Recycled Polyester (rPET), quoted per position and per colour.
• Rubber Coating — available on Recycled Polyester (rPET), quoted per position and per colour.
• Braided Weave — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with hard enamel fill applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same compression profile.

FAQ

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your sleeve & knee sleeve programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.