Custom Gloves — Polyester with Rotary Screen Printing
We supply gloves to brands, retailers and uniform programmes, made in Polyester with rotary screen printing for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Gloves |
|---|---|
| Size | S / 7 |
| Type | liner glove |
| Material | Polyester |
| Construction / finish | Rotary Screen Printing |
| Colour options | 16 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | GSO conformity with Arabic labelling; EN 71 part 3 for decorative components |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Heat Transfer Printing — available on Polyester, quoted per position and per colour.
- Embossing — available on Polyester, quoted per position and per colour.
- Water-Repellent Finish — available on Polyester, quoted per position and per colour.
- Jacquard Weave — available on Polyester, quoted per position and per colour.
- Epoxy Dome — available on Polyester, quoted per position and per colour.
- Rubber Coating — available on Polyester, quoted per position and per colour.
- Rotary Screen Printing — available on Polyester, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester
- Construction sample with rotary screen printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your gloves programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
