Custom Clothing Accessory in Seersucker with Dye-Sublimation Printing for Outerwear and Jacket Programmes

Custom Clothing Accessory — Seersucker with Dye-Sublimation Printing

We supply clothing accessory to brands, retailers and uniform programmes, made in Seersucker with dye-sublimation printing for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Dye-Sublimation Printing — available on Seersucker, quoted per position and per colour.
• Binding Tape Edge — available on Seersucker, quoted per position and per colour.
• Heat Transfer Printing — available on Seersucker, quoted per position and per colour.
• Beaded Detail — available on Seersucker, quoted per position and per colour.
• Anti-Rust Treatment — available on Seersucker, quoted per position and per colour.
• Moisture-Wicking Finish — available on Seersucker, quoted per position and per colour.
• Embossing — available on Seersucker, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Seersucker
3. Construction sample with dye-sublimation printing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 10 working days, and each revision about 4 days.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.