Custom Clothing Accessory — Bonded Leather with Moisture-Wicking Finish
We supply clothing accessory to brands, retailers and uniform programmes, made in Bonded Leather with moisture-wicking finish for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is plating that survives contact with skin and dry cleaning — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 80 mm |
| Type | collar pin |
| Material | Bonded Leather |
| Construction / finish | Moisture-Wicking Finish |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Smocking — available on Bonded Leather, quoted per position and per colour.
- Sanforising — available on Bonded Leather, quoted per position and per colour.
- Chrome Plating — available on Bonded Leather, quoted per position and per colour.
- Gunmetal Plating — available on Bonded Leather, quoted per position and per colour.
- Injection Moulding — available on Bonded Leather, quoted per position and per colour.
- Embossing — available on Bonded Leather, quoted per position and per colour.
- Moisture-Wicking Finish — available on Bonded Leather, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Bonded Leather
- Construction sample with moisture-wicking finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same plating that survives contact with skin and dry cleaning.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your clothing accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
