Custom Clothing Accessory — Zinc Alloy with Fringe Finish
We supply clothing accessory to brands, retailers and uniform programmes, made in Zinc Alloy with fringe finish for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 80 mm |
| Type | removable collar |
| Material | Zinc Alloy |
| Construction / finish | Fringe Finish |
| Colour options | 8 shades, Pantone matched |
| Packing | carded |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Fringed Edge — available on Zinc Alloy, quoted per position and per colour.
- Hard Enamel Fill — available on Zinc Alloy, quoted per position and per colour.
- Nickel Plating — available on Zinc Alloy, quoted per position and per colour.
- Anti-Pilling Finish — available on Zinc Alloy, quoted per position and per colour.
- Black Oxide — available on Zinc Alloy, quoted per position and per colour.
- Smocking — available on Zinc Alloy, quoted per position and per colour.
- Pleating — available on Zinc Alloy, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Zinc Alloy
- Construction sample with fringe finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your clothing accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
