Custom Tie & Accessory — Polyethylene (PE) with Edge Painting
We supply tie & accessory to brands, retailers and uniform programmes, made in Polyethylene (PE) with edge painting for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 8 cm |
| Type | bow tie |
| Material | Polyethylene (PE) |
| Construction / finish | Edge Painting |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 1000 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; GRS recycled content claim |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Tie Dyeing — available on Polyethylene (PE), quoted per position and per colour.
- Pleating — available on Polyethylene (PE), quoted per position and per colour.
- Anti-Pilling Finish — available on Polyethylene (PE), quoted per position and per colour.
- Fringed Edge — available on Polyethylene (PE), quoted per position and per colour.
- Mercerised Finish — available on Polyethylene (PE), quoted per position and per colour.
- Hot Foil Stamping — available on Polyethylene (PE), quoted per position and per colour.
- Rhinestone Setting — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyethylene (PE)
- Construction sample with edge painting applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
