Custom Tie & Accessory — Fleece with Smocking
We supply tie & accessory to brands, retailers and uniform programmes, made in Fleece with smocking for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 9 cm wide |
| Type | knit tie |
| Material | Fleece |
| Construction / finish | Smocking |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Brushed Finish — available on Fleece, quoted per position and per colour.
- Moisture-Wicking Finish — available on Fleece, quoted per position and per colour.
- Pantone Colour Matching — available on Fleece, quoted per position and per colour.
- Pleating — available on Fleece, quoted per position and per colour.
- Yarn Dyeing — available on Fleece, quoted per position and per colour.
- Placement Printing — available on Fleece, quoted per position and per colour.
- Hard Enamel Fill — available on Fleece, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Fleece
- Construction sample with smocking applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your tie & accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
