Custom Tie & Accessory in Recycled Polyester (rPET) with Rotary Screen Printing for Childrenswear and Schoolwear

Custom Tie & Accessory — Recycled Polyester (rPET) with Rotary Screen Printing

We supply tie & accessory to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with rotary screen printing for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-UV Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Placement Printing — available on Recycled Polyester (rPET), quoted per position and per colour.
• Powder Coating — available on Recycled Polyester (rPET), quoted per position and per colour.
• Embossed Grain — available on Recycled Polyester (rPET), quoted per position and per colour.
• Smocking — available on Recycled Polyester (rPET), quoted per position and per colour.
• Tassel Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Hand-Rolled Hem — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with rotary screen printing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your tie & accessory programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.