Custom Tie & Accessory — Polypropylene (PP) with Anti-Static Finish
We supply tie & accessory to brands, retailers and uniform programmes, made in Polypropylene (PP) with anti-static finish for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | pre-tied bow |
| Type | ascot |
| Material | Polypropylene (PP) |
| Construction / finish | Anti-Static Finish |
| Colour options | 8 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Placement Printing — available on Polypropylene (PP), quoted per position and per colour.
- Dye-Sublimation Printing — available on Polypropylene (PP), quoted per position and per colour.
- Machine-Rolled Hem — available on Polypropylene (PP), quoted per position and per colour.
- Woven Jacquard — available on Polypropylene (PP), quoted per position and per colour.
- Rib Knit — available on Polypropylene (PP), quoted per position and per colour.
- Fringed Edge — available on Polypropylene (PP), quoted per position and per colour.
- Laser Cutting — available on Polypropylene (PP), quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polypropylene (PP)
- Construction sample with anti-static finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
