Custom Tie & Accessory — Spandex Jersey with Braided Weave
We supply tie & accessory to brands, retailers and uniform programmes, made in Spandex Jersey with braided weave for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is interlining recovery, so the knot springs back after a day of wear — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 5 cm skinny |
| Type | tie bar |
| Material | Spandex Jersey |
| Construction / finish | Braided Weave |
| Colour options | 16 shades, Pantone matched |
| Packing | carded |
| MOQ | 2000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Woven Jacquard — available on Spandex Jersey, quoted per position and per colour.
- Embroidery — available on Spandex Jersey, quoted per position and per colour.
- Binding Tape Edge — available on Spandex Jersey, quoted per position and per colour.
- Digital Printing — available on Spandex Jersey, quoted per position and per colour.
- Anti-Pilling Finish — available on Spandex Jersey, quoted per position and per colour.
- Water-Repellent Finish — available on Spandex Jersey, quoted per position and per colour.
- Rotary Screen Printing — available on Spandex Jersey, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Spandex Jersey
- Construction sample with braided weave applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same interlining recovery.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
