Custom Tie & Accessory — Flannel with Soft Enamel Fill
We supply tie & accessory to brands, retailers and uniform programmes, made in Flannel with soft enamel fill for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is stain resistance, since a tie is rarely washable — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | pre-tied bow |
| Type | skinny tie |
| Material | Flannel |
| Construction / finish | Soft Enamel Fill |
| Colour options | 12 shades, Pantone matched |
| Packing | carded |
| MOQ | 300 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | REACH and GPSR documentation; salt spray test for metal finishes |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Rib Knit — available on Flannel, quoted per position and per colour.
- Dye-Sublimation Printing — available on Flannel, quoted per position and per colour.
- Embroidery — available on Flannel, quoted per position and per colour.
- Cable Knit — available on Flannel, quoted per position and per colour.
- Moisture-Wicking Finish — available on Flannel, quoted per position and per colour.
- Space Dyeing — available on Flannel, quoted per position and per colour.
- Rhinestone Setting — available on Flannel, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Flannel
- Construction sample with soft enamel fill applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same stain resistance.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
