Custom Tie & Accessory — Tweed with Quilting
We supply tie & accessory to brands, retailers and uniform programmes, made in Tweed with quilting for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is pattern matching across the fold and the tip — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 8 cm |
| Type | necktie |
| Material | Tweed |
| Construction / finish | Quilting |
| Colour options | 12 shades, Pantone matched |
| Packing | carded |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; salt spray test for metal finishes |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Sewn Edge — available on Tweed, quoted per position and per colour.
- Beaded Detail — available on Tweed, quoted per position and per colour.
- Tie Dyeing — available on Tweed, quoted per position and per colour.
- Piece Dyeing — available on Tweed, quoted per position and per colour.
- Anti-Static Finish — available on Tweed, quoted per position and per colour.
- Stamping — available on Tweed, quoted per position and per colour.
- Rubber Coating — available on Tweed, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Tweed
- Construction sample with quilting applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pattern matching across the fold and the tip.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
