Custom Tie & Accessory — Chiffon with Stamping
We supply tie & accessory to brands, retailers and uniform programmes, made in Chiffon with stamping for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is pattern matching across the fold and the tip — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Tie & Accessory |
|---|---|
| Width | 5 cm skinny |
| Type | clip-on tie |
| Material | Chiffon |
| Construction / finish | Stamping |
| Colour options | 24 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; azo dye-free declaration |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Sewn Edge — available on Chiffon, quoted per position and per colour.
- Pleating — available on Chiffon, quoted per position and per colour.
- Edge Painting — available on Chiffon, quoted per position and per colour.
- Pantone Colour Matching — available on Chiffon, quoted per position and per colour.
- Heat-Cut Edge — available on Chiffon, quoted per position and per colour.
- Crochet — available on Chiffon, quoted per position and per colour.
- Binding Tape Edge — available on Chiffon, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Chiffon
- Construction sample with stamping applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pattern matching across the fold and the tip.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your tie & accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
