Case Study: Custom Anti-Slip Tape for a Footwear Factory in Canada
Source:Dry Fountain Nozzles /
Time:2026-09-18
Anti-Slip Tape for a Footwear Factory in Canada
A Footwear Factory approached us with a anti-slip tape requirement for the Canada market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Cartons packed to the factory ratio instead of the buyer's size ratio
- A compliance document that arrived after the goods were already shipped
- Lead time quoted without the plating or dyeing sub-process
What we specified
| Item | Anti-Slip Tape |
|---|---|
| Client type | A Footwear Factory |
| Market | Canada |
| Order volume | 10,000 pieces across 2 specifications |
| Base material | Nylon |
| Standard size | 25 mm Width |
| Finish | Rainbow Iridescent Finish |
| Sampling rounds | 4 |
| Delivery window | 5 weeks from PO to ex-factory |
| Compliance | WRAP |
How it was resolved
- We rebuilt the specification around Nylon and locked the tolerance before bulk.
- The finish was moved to UV Printing after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 10,000 pieces delivered inside the 5-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
