Case Study: Custom Ladder Lock for a Bridal Studio in Thailand
Source:Gemstone Settings And Mounts /
Time:2026-09-18
Ladder Lock for a Bridal Studio in Thailand
A Bridal Studio approached us with a ladder lock requirement for the Thailand market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shade drift between the approved lab dip and the bulk lot
- A zipper puller that broke under pull test at the warehouse
- Lead time quoted without the plating or dyeing sub-process
What we specified
| Item | Ladder Lock |
|---|---|
| Client type | A Bridal Studio |
| Market | Thailand |
| Order volume | 50,000 pieces across 4 specifications |
| Base material | Nylon |
| Standard size | 20 mm Width |
| Finish | Brushed Silver Finish |
| Sampling rounds | 3 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | OEKO-TEX Standard 100 |
How it was resolved
- We rebuilt the specification around Nylon and locked the tolerance before bulk.
- The finish was moved to Antique Brass Plating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 50,000 pieces delivered inside the 6-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
