Case Study: Custom Woven Label for a Yacht Interior Studio in Colombia
Source:Artificial Ornate Picture Frames /
Time:2026-09-18
Woven Label for a Yacht Interior Studio in Colombia
A Yacht Interior Studio approached us with a woven label requirement for the Colombia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A spec that lived in an email instead of a tech pack
- An interlining that bubbled after the first press
- Lead time quoted without the plating or dyeing sub-process
What we specified
| Item | Woven Label |
|---|---|
| Client type | A Yacht Interior Studio |
| Market | Colombia |
| Order volume | 5,000 pieces across 2 specifications |
| Base material | Zinc Alloy |
| Standard size | 6 mm Width |
| Finish | Antique Brass Plating |
| Sampling rounds | 2 |
| Delivery window | 5 weeks from PO to ex-factory |
| Compliance | Sedex SMETA |
How it was resolved
- We rebuilt the specification around Zinc Alloy and locked the tolerance before bulk.
- The finish was moved to Pearlescent Coating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 5,000 pieces delivered inside the 5-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
