Case Study: Custom Buckle for a Fast Fashion Retail Chain in Israel
Source:Coir Plant Mats /
Time:2026-09-18
Buckle for a Fast Fashion Retail Chain in Israel
A Fast Fashion Retail Chain approached us with a buckle requirement for the Israel market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Cartons packed to the factory ratio instead of the buyer's size ratio
- A trim that passed sampling but failed in-line because it was never cycle tested
- A spec that lived in an email instead of a tech pack
What we specified
| Item | Buckle |
|---|---|
| Client type | A Fast Fashion Retail Chain |
| Market | Israel |
| Order volume | 20,000 pieces across 2 specifications |
| Base material | Iron |
| Standard size | 9 mm Width |
| Finish | Powder Coating |
| Sampling rounds | 2 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | ISO 9001 |
How it was resolved
- We rebuilt the specification around Iron and locked the tolerance before bulk.
- The finish was moved to Epoxy Doming after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 6-week window.
- Unit cost held within 1.5% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
