Case Study: Custom Chain Trim for a Bridal Studio in Singapore
Source:Bamboo Cutting Boards /
Time:2026-09-18
Chain Trim for a Bridal Studio in Singapore
A Bridal Studio approached us with a chain trim requirement for the Singapore market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- MOQ that was quoted per colourway rather than per style
- Shrinkage that only showed up after the first wash
What we specified
| Item | Chain Trim |
|---|---|
| Client type | A Bridal Studio |
| Market | Singapore |
| Order volume | 10,000 pieces across 4 specifications |
| Base material | PU Leather |
| Standard size | 15 mm Width |
| Finish | Antique Brass Plating |
| Sampling rounds | 2 |
| Delivery window | 4 weeks from PO to ex-factory |
| Compliance | ISO 12947 Abrasion Resistance |
How it was resolved
- We rebuilt the specification around PU Leather and locked the tolerance before bulk.
- The finish was moved to Brushed Silver Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 10,000 pieces delivered inside the 4-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
