Case Study: Custom Air Mesh Fabric for a School Uniform Buyer in Japan
Source:Gold Cartilage Earrings /
Time:2026-09-18
Air Mesh Fabric for a School Uniform Buyer in Japan
A School Uniform Buyer approached us with a air mesh fabric requirement for the Japan market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A spec that lived in an email instead of a tech pack
- Shrinkage that only showed up after the first wash
- Elastic that lost recovery after three washes
What we specified
| Item | Air Mesh Fabric |
|---|---|
| Client type | A School Uniform Buyer |
| Market | Japan |
| Order volume | 10,000 pieces across 4 specifications |
| Base material | Wood |
| Standard size | 110 gsm |
| Finish | Antique Copper Finish |
| Sampling rounds | 4 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | BSCI |
How it was resolved
- We rebuilt the specification around Wood and locked the tolerance before bulk.
- The finish was moved to Sandblasted Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 10,000 pieces delivered inside the 10-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
