Case Study: Custom Collar Canvas for an Outdoor Gear Label in Peru
Source:Fashion Lanyard /
Time:2026-09-18
Collar Canvas for an Outdoor Gear Label in Peru
An Outdoor Gear Label approached us with a collar canvas requirement for the Peru market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- A trim that passed sampling but failed in-line because it was never cycle tested
- An interlining that bubbled after the first press
What we specified
| Item | Collar Canvas |
|---|---|
| Client type | An Outdoor Gear Label |
| Market | Peru |
| Order volume | 20,000 pieces across 2 specifications |
| Base material | Recycled PET |
| Standard size | 32 mm Width |
| Finish | UV Printing |
| Sampling rounds | 3 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | CPSIA |
How it was resolved
- We rebuilt the specification around Recycled PET and locked the tolerance before bulk.
- The finish was moved to Rose Gold Plating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 20,000 pieces delivered inside the 8-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
