Case Study: Custom Resin Button for a Hat and Cap Producer in Denmark
Source:Leather Jewelry Box /
Time:2026-09-18
Resin Button for a Hat and Cap Producer in Denmark
A Hat and Cap Producer approached us with a resin button requirement for the Denmark market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shrinkage that only showed up after the first wash
- MOQ that was quoted per colourway rather than per style
- Shade drift between the approved lab dip and the bulk lot
What we specified
| Item | Resin Button |
|---|---|
| Client type | A Hat and Cap Producer |
| Market | Denmark |
| Order volume | 50,000 pieces across 3 specifications |
| Base material | ABS Resin |
| Standard size | 12 mm Width |
| Finish | Enzyme Wash Finish |
| Sampling rounds | 2 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | California Prop 65 |
How it was resolved
- We rebuilt the specification around ABS Resin and locked the tolerance before bulk.
- The finish was moved to Epoxy Doming after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 50,000 pieces delivered inside the 8-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
